[ Pobierz całość w formacie PDF ]

low level or vice versa.

In Standard EIA-422-A, VOC, which is the average of the two output voltages with respect to ground, is called output offset voltage, VOS.

Only one output at a time should be shorted, and duration of the short circuit should not exceed one second.
switching characteristics, VCC = 5 V, TA = 25C
PARAMETER TEST CONDITIONS MIN TYP MAX UNIT
td(OD) Differential output delay time 10 20 ns
CL =15pF RL = 100 &! See Figure 2
CL = 15 pF, RL = 100 &!, See Figure 2
tt(OD) Differential output transition time 10 20 ns
tsk(o) Output skew See Figure 2 1 ns
3
POST OFFICE BOX 655303 " DALLAS, TEXAS 75265
uA9638C
DUAL HIGH-SPEED DIFFERENTIAL LINE DRIVER
SLLS112C  OCTOBER 1980  REVISED APRIL 1994
PARAMETER MEASUREMENT INFORMATION
50 &!
VOD2
Input
VOC
50 &!
Figure 1. Differential and Common-Mode Output Voltages
3 V
Input
1.5 V 1.5 V
0 V
td(OD) td(OD)
Y Output
Differential
90%
90%
CL
Output
10%
10%
RL = 100 &!
Generator
tt(OD) tt(OD)
(see Note A)
50 &!
Z Output
VOH
CL = 15 pF Y Output
50% 50%
(see Note B)
VOL
tsk(o) tsk(o)
VOH
50% 50%
Z Output
VOL
TEST CIRCUIT VOLTAGE WAVEFORMS
NOTES: A. The input pulse generator has the following characteristics: ZO = 50 &!, PRR d" 500 kHz, tw = 100 ns, tr = d" 5 ns.
B. CL includes probe and jig capacitance.
Figure 2. Test Circuit and Voltage Waveforms
4
POST OFFICE BOX 655303 " DALLAS, TEXAS 75265
IMPORTANT NOTICE
Texas Instruments and its subsidiaries (TI) reserve the right to make changes to their products or to discontinue
any product or service without notice, and advise customers to obtain the latest version of relevant information
to verify, before placing orders, that information being relied on is current and complete. All products are sold
subject to the terms and conditions of sale supplied at the time of order acknowledgement, including those
pertaining to warranty, patent infringement, and limitation of liability.
TI warrants performance of its semiconductor products to the specifications applicable at the time of sale in
accordance with TI s standard warranty. Testing and other quality control techniques are utilized to the extent
TI deems necessary to support this warranty. Specific testing of all parameters of each device is not necessarily
performed, except those mandated by government requirements.
CERTAIN APPLICATIONS USING SEMICONDUCTOR PRODUCTS MAY INVOLVE POTENTIAL RISKS OF
DEATH, PERSONAL INJURY, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE ( CRITICAL
APPLICATIONS ). TI SEMICONDUCTOR PRODUCTS ARE NOT DESIGNED, AUTHORIZED, OR
WARRANTED TO BE SUITABLE FOR USE IN LIFE-SUPPORT DEVICES OR SYSTEMS OR OTHER
CRITICAL APPLICATIONS. INCLUSION OF TI PRODUCTS IN SUCH APPLICATIONS IS UNDERSTOOD TO
BE FULLY AT THE CUSTOMER S RISK.
In order to minimize risks associated with the customer s applications, adequate design and operating
safeguards must be provided by the customer to minimize inherent or procedural hazards.
TI assumes no liability for applications assistance or customer product design. TI does not warrant or represent
that any license, either express or implied, is granted under any patent right, copyright, mask work right, or other
intellectual property right of TI covering or relating to any combination, machine, or process in which such
semiconductor products or services might be or are used. TI s publication of information regarding any third
party s products or services does not constitute TI s approval, warranty or endorsement thereof.
Copyright 1998, Texas Instruments Incorporated [ Pobierz całość w formacie PDF ]

  • zanotowane.pl
  • doc.pisz.pl
  • pdf.pisz.pl
  • razem.keep.pl