[ Pobierz całość w formacie PDF ]
ÿþSPECIFIC VEHICLE ALARM FITTING INSTRUCTIONS REV. 00
www.cobra.it
PETROL
VOLKSWAGEN NEW BEETLE 01 ’! DIESEL
’!
MAKE MOD. YEAR
X
ALARM/SIREN Position the compact alarms and the sirens behind the headlamp, passenger s
side.
POSITION
CENTRAL UNIT POSITION Position the modular systems and the modules under the dashboard.
POWER SUPPLY + 30: connect to the RED wire located in the wiring harness coming out of the
ignition key.
- 31: connect to the ground terminal located behind the sillcover, driver s side.
IGNITION WIRE +15/54: connect to the YELLOW wire located in the wiring harness coming out of
the ignition key.
DIRECTION INDICATORS Connect to the PINK wire at the position nr. A3 and to the VIOLET wire at the
position A4, in the connector marked P202 in the lockings central behind the
steering column.
ELECTRIC WINDOWS Negative control
Comfort closing
The closing of the windows is obtained timing the YELLOW/BLUE wire of the
doors locking.
CENTRAL DOORS LOCKING Negative control signal
Connect to the YELLOW/BLUE wire (lock) and to the GREEN/RED wire (unlock)
located in the wiring harness that goes to the lock directly iside the driver s side
door.
IMMOBILISATION POINT Gasoil pump
Cut the RED/VIOLET wire located in the wiring harness coming out of the fuse nr.
32 in the fuse box, fixed on the left, under the dashboard, driver s side.
STARTER +50: Cut the RED/BLACK wire located in the wiring harness coming out of the 6
way light brown connector, located on the connector s holder plate, under the
driver s side dashboard.
BONNET SWITCH Install an additional switch on the front headlamp support plate, driver s side.
DOORS SWITCH Connect to the GREEN/GREY wire, at the position 27, in the connector marked
P201 in the central locking unit placed behind the steering column.
BOOT SWITCH Connect to the VIOLET wire, at the position nr. 23, in the connector marked P201
in the central locking unit placed behind the steering column.
vonbe01gbd.doc
Note: This information is not binding, therefore it must be considered only an example for installation purposes that must be executed
as per the instructions given on the product installation manual.
[ Pobierz całość w formacie PDF ]